Testing

Any rider under the testing jurisdiction of the FIM may be tested at any time with no advance notice, in and/or out-of-competition, and be required to provide a urine, blood sample or blood for a Dried Blood Spot (DBS) analysis.

 

“In-Competition” means the period after the rider has passed the technical and/or administrative scrutineering, whichever is the earlier, before a competition in which the rider is scheduled to participate through the end of such competition and the sample collection process related to such competition.

“Out-of-competition" is any time frame that falls outside of the "in-competition" period by default.

The aim of testing is to protect clean riders through the detection and deterrence of doping.

 

Sample Collection Process

 

  1. Rider Selection: A rider can be selected for testing at any time and any place.
  2. Notification: A Doping Control Officer (DCO) or chaperone will notify the rider of their selection and outline their rights and responsibilities.
  3. Reporting to the Doping Control Station: The rider should report to the doping control station immediately after being notified. The DCO may allow a delay in reporting for a valid reason.
  4. Sample Collection Equipment: The rider is given a choice of individually sealed sample collection vessels and kits to choose from.
  5. They must inspect the equipment and verify the sample code numbers.
  6. Collecting the sample:
  • For a urine sample:
  • Providing the sample: The rider will be asked to provide the sample under the direct observation of a DCO or witnessing chaperone of the same gender.
  • Volume: A minimum 90mL is required for urine samples. If the first sample is not 90mL, the rider may be asked to wait and provide an additional sample.
  • Splitting the sample: The rider will split their sample into A and B bottles.
  • Sealing the samples: The rider will seal the A and B bottles in accordance with the DCO’s instructions.
  • Measuring specific gravity: The DCO will measure the specific gravity of the sample to ensure it is not too dilute to analyze. If it is too dilute, the rider may be asked to provide additional samples.
  • For a blood sample:
    • The rider will be asked to remain seated and relaxed for at least 10 minutes before undergoing venipuncture (only for the Athlete Biological Passport (ABP) blood samples).
    • The Blood Collection Officer (BCO) will ask for the rider’s non-dominant arm, apply a tourniquet to the upper arm, and clean the skin at the puncture site.
    • The BCO will draw blood from the rider and fill each Vacutainer blood tube with the required volume of blood.
    • The BCO will place the Vacutainer tubes into the A and B kits (only one vial may be necessary if the blood sample is collected as part of an ABP program).
  •  For a Dried Blood Spot (DBS) factsheet on the basics of DBS,
    • The DCO/BCO will assess the most suitable location for the puncture that is unlikely to adversely affect the rider or their sporting performance (e.g., finger of a non-dominant hand/arm).
    • The rider will warm the sample collection site (especially in case the hands are cold).
    • The DCO/BCO will disinfect the blood sample site with a sterile disinfectant pad or swab.
    • The DCO/BCO will collect the blood from the fingertips (with cellulose based cards) or from the upper arm (with microneedles devices).
    • The DCO/BCO will transfer the DBS samples into a secure kit that is labelled as A&B.
  1. Completing the Doping Control Form (DCF): The rider will check and confirm that all of the information is correct, including the sample code number and their declaration of medications and/or products they have used. They will also be asked their consent for the use of the sample for research purposes. They will receive a copy of the DCF and should keep it.
  2. Laboratory Process: All samples are sent to WADA accredited laboratories for analysis.